What are the possible solutions for the 'battery cannot charge' error on Ledger when working with cryptocurrency?

3 answers

• Dec 16, 2021 · 3 years ago
  One possible solution is to check if the USB cable you are using is working properly. Try using a different cable or connecting the Ledger device to a different USB port to see if that resolves the issue. Sometimes, a faulty cable or a malfunctioning USB port can cause charging problems. Another solution is to make sure that the Ledger device is fully charged before using it. Connect it to a power source and let it charge for a few hours. If the battery is completely drained, it may take some time to start charging again. If the above solutions don't work, you can try resetting the Ledger device. This can be done by holding down the button on the device for about 10 seconds until the screen turns off and then releasing the button. After that, you can try connecting it to a power source again and see if it starts charging. Please note that these solutions are general troubleshooting steps and may not work in all cases. If the problem persists, it is recommended to contact Ledger support for further assistance.
  1027514
• Dec 16, 2021 · 3 years ago
  Hey there! So, you're facing the 'battery cannot charge' error on your Ledger device while dealing with cryptocurrencies, huh? No worries, I've got a couple of solutions for you! First things first, check your USB cable. Sometimes, a faulty cable can cause charging issues. Try using a different cable or plugging it into a different USB port. That might just do the trick! If that doesn't work, make sure your Ledger device is fully charged. Connect it to a power source and let it juice up for a few hours. It might take a while if the battery is completely drained. Still no luck? Okay, let's try resetting the Ledger device. Hold down the button for about 10 seconds until the screen turns off, then release it. Give it another shot at charging after that. If none of these solutions work, it's time to reach out to Ledger support for some expert help. They'll guide you through the process and get you back on track in no time! Good luck!
  947316
• Dec 16, 2021 · 3 years ago
  When encountering the 'battery cannot charge' error on your Ledger device, there are a few possible solutions you can try: 1. Check the USB cable and port: Ensure that the USB cable you're using is functioning properly. Try using a different cable or connecting the device to a different USB port to rule out any issues with the cable or port. 2. Charge the device: Make sure your Ledger device has enough battery power. Connect it to a power source and let it charge for a few hours. If the battery is completely drained, it may take some time to start charging again. 3. Reset the device: If the above solutions don't work, you can try resetting the Ledger device. Hold down the button on the device for about 10 seconds until the screen turns off, then release the button. After that, try connecting it to a power source again and see if it starts charging. Remember, these solutions are general troubleshooting steps and may not solve the issue in all cases. If the problem persists, it's best to contact Ledger support for further assistance.
  1051263