Is there a way to fix a nano that won't power on?

3 answers

• Dec 18, 2021 · 3 years ago
  It's possible that the battery of your nano is completely drained. Try connecting it to a power source using a different charging cable and adapter. Leave it charging for at least 30 minutes and then try turning it on again. If it still doesn't work, you may need to contact the manufacturer for further assistance. Remember to always keep your nano's firmware up to date to avoid any potential issues.
  403202
• Dec 18, 2021 · 3 years ago
  I had a similar issue with my nano before. What worked for me was performing a hard reset. To do this, press and hold the power button for about 10 seconds until the device turns off. Then release the button and press it again to turn it back on. This should reset the device and hopefully fix the power issue. If this doesn't work, you can also try connecting your nano to a computer and using the manufacturer's software to troubleshoot the problem.
  452151
• Dec 18, 2021 · 3 years ago
  As an expert from BYDFi, I would recommend checking the charging port of your nano for any debris or damage. Sometimes, dust or lint can accumulate in the port and prevent proper charging. Use a soft brush or compressed air to clean the port gently. Be careful not to damage the port. If cleaning the port doesn't solve the issue, you can try using a different USB cable and adapter to charge your nano. Sometimes, the cable or adapter may be faulty and not providing enough power to turn on the device. If none of these solutions work, it's best to reach out to the manufacturer's support team for further assistance.
  620155